
Curtain
1 Push and hold the Off button to shut the machine off.
2 Remove front panel.
3 Remove evaporator cover.
4 Push inside tab in to release front curtain pin from holder.
5 Pull curtain from machine.
6 Reverse to reassemble.
7 Push and release the ON button to restart the machine.
Curtain switch
1 Push and hold the Off button to shut the machine off.
2 Disconnect electrical power
3 Remove front panel.
4 Remove evaporator cover.
5 Remove sound shield
6 Open control box.
7 Locate curtain switch on evaporator mounting bracket. Pull switch from its snaps.
8 Dismount wires from sump cover and remove from J7 or J8 connector on control board.
9 Reverse to reassemble. Be sure wires are re-mounted to sump cover edge.
September 2006 Page 109
Repair Procedures
Electrical Shock Hazard.
Disconnect electrical
power before beginning.
Comentarios a estos manuales