Scotsman CME1356 Manual de usuario descargar pdf (Pagina 14)

Subject: Controller Cover

Affects all versions of models: CME1356, CME1656, CME1856 and CME2006

The above models are now manufactured with a sheet metal cover over the top of the controller.

Service controllers also are now shipped with a cover that should be applied to these models

whenever replacing the controller if the machine does not already have a cover installed.

Whenever cleaning or servicing any unit, check to see whether it has a cover over the controller like

the one shown below. If it does not, Scotsman recommends installing a cover. A separate part is

now available for this purpose. Its part number is A37480-021. It mounts over the top end of the

controller and is secured by two sheet metal screws. Use the cover as a template and drill two 1/8”

holes for the two screws.

Scotsman is shipping a supply of covers to all Scotsman Distributors and listed service agencies. A

supply of covers should be carried by each service person on service calls so a cover may be

installed on the unit being cleaned or serviced if one is not already in place. Additional covers may

be obtained free of charge from Scotsman, through the local Scotsman Distributor, as needed.

Bulletin Number: PS - 4 - 2004

Bulletin Date: April 2004

SERVICE BULLETIN

Controller Cover

Cover Installed on Unit

1 2 ... 9 10 11 12 13 14

Sin comentarios

Scotsman CME1356 Manual de usuario Pagina 14