Scotsman CMS1002W Especificaciones descargar pdf (Pagina 2)

SPECIFICATIONS

Always refer to the nameplate, located on the back

of the cabinet, for the:

••model number,

••serial number,

••basic electrical

requirements,

••minimum circuit ampacity,

••maximum fuse size,

••and refrigerant charge.

A serial number plate with the model number,

serial number and refrigerant charge is located

behind the front panel, near the control box.

The unit comes from the factory with the correct

refrigerant charge. The refrigerant charge

information is for recharging, should that be

necessary.

All utility connections are made at the back of the

ice maker.

Before beginning installation, be sure that all of the

components necessary for complete assembly of

the ice system are available, and are the correct

components with regard to model, voltage, and

finish.

A stacking kit (KSCMS) is required for stacking

CMS1002 ice machines. It interconnects the sonar

bin ice level controls. CMS1002 may only be

stacked onto another CMS1002.

The CMS1002 will fit any 30" wide Scotsman bin

without needing a bin top. Other bins will require a

bin top.

Model Number Dimensions W"

x D" x H"

Basic Electrical Refrigerant Type Refrigerant Charge*

CMS1002WE-32A 30 x 24 x 27 208-230/60/1 R-22 55 ounces

CMS1002WE-3A 30 x 24 x 27 208-230/60/3 R-22 55 ounces

* The system charge is in the machine. This number is for recharging purposes only. If the nameplate has a

different value, go by the nameplate.

Air Temperature Water Temperature Voltage

Minimum 50

F. 40

F. -5%

Maximum 100

F. 100

F. +10%

CMS1002W

September, 1993

Page 2

1 2 3 4 5 6 7 ... 21 22

CMS1002W 1

Comentarios a estos manuales

Sin comentarios

Scotsman CMS1002W Especificaciones Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Máquinas productoras de hielo Scotsman CMS1002W