Scotsman C1848R Manual de usuario descargar pdf (Pagina 14)

Drains

All models require drain tubing to be attached to

them. There is a single ¾” FPT drain fitting in the

back of the cabinet.

Install new tubing when replacing a prior ice

machine, as the tubing will have been sized for the

old model and might not be correct for this one.

1. Connect water supply to water inlet fittings.

2. Connect drain tubing to drain fitting.

3. Route the drain tubing to building drain. Follow

local codes for air gap.

4. Use rigid drain tubes and route them

separately – do not Tee into the bin’s drain.

Vent the reservoir drain. A vertical vent at the back

of the drain, extended about 8 – 10” will allow the

gravity drain to empty and also keep any surges

during draining from discharging water.

Horizontal runs of drain tubing need a ¼” per fall

per foot of run for proper draining.

Follow all applicable codes.

November 2006

Page 13

C1448, C1848, C2148

Remote Condenser Models - User Manual

Water Supply and Drain Connections

Water Inlet

Connection

Potable Water

Supply

Reservoir

Drain, Venting

Required

Optional Water

Filters

Floor Drain

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Sin comentarios

Scotsman C1848R Manual de usuario Pagina 14